Kyocera 1650 All in One Printer User Manual


 
Preparations
2-15
Network (TCP/IP) Settings
Register the IP address of this machine.
Notes The IP address that should be registered here differs depending upon your network
environment. Check with your network administrator before performing this setting.
If you use the following procedure to manually register the IP address, be sure to turn the
DHCP setting Off and the TCP/IP setting On. (For details, refer to Chapter 2 in Advanced
Operation Guide, Network Setting.)
1
Press the Printer key.
2
Press the S key or the T key to select MENU.
3
Press the Enter key.
4
Press the S key or the T key to select Interface.
5
Press the Enter key.
6
Press the S key or the T key to select Network.
GO
CANCEL
Ready
MENU
Back
Print Status Page
Menu
Interface
Back
Parallel
Interface
Network