Filter
Top Products
Basic Operation
3-13
2
Press the Duplex/Split Page key.
3
Press the S key or the T key to select the desired split
copy mode from 2 sided->1 sided
[2-sided->1-sided] and Book->1-sided.
4
Press the Enter key.
If you have selected 2 sided->1 sided
[2-sided->1-sided], proceed to the next step.
If you have selected Book->1-sided, proceed to step
7.
5
Press the S key or the Tkey to select the original
stitch side.
6
Press the Enter key.
7
Press the Start key. Scanning of the original starts.
If the originals have been set in the optional document
processor, copying starts automatically.
If the original has been set on the platen, a message
prompting replacement of the original is displayed. In
this case, proceed to the next step.
8
Replace the original and press the Start key. Scanning of the original starts.
2 sided
Book 2-sided
1 sided
Book
1-sided
Duplex/Split Page:
Original stitch side:
Left side
Top side