Filter
Top Products
Optional Equipment
4-4
Setting Originals on the Platen
When copying from an original which cannot be set in
the document processor, open the document processor
and set the original directly on the platen.
Notes • Before opening the document processor, make sure that there are no originals remaining on
the original table or on the original eject table. If there are originals left in either place, they may
fall off the machine when the document processor is opened.
• When double-page spread originals such as books are copied, shadows may appear along the
edges and at the middle of copies.
• Do not put undue pressure on the platen when closing the document processor. The platen
glass may be broken.
Caution
Do not leave the document processor open as there is a danger of personal injury.