Filter
Top Products
4-4
4. Selecting the Printer Settings
● Selecting the serial interface settings
Select “Serial” tab.
Use the “▲” and “▼” cursor keys to select the desired item and then
touch the “Change” key. The setting screen for the selected item will
appear.
Baud rate: Sets the Baud Rate 3.
Data Bits: Sets the data bit length 4.
Stop Bits: Sets the stop bit length 5.
Parity: Sets the parity 6.
Protocol: Sets the protocol 7.
Select the desired setting for each item and then touch the “Close”
key. The display will return to the [Interface] screen.
3
● Selecting the network interface
Select “Network” tab.
Use the “▲” and “▼” cursor keys to select the desired item and then
touch the “Change” key. The setting screen for the selected item will
appear.
Netware: Turns NetWare On/Off 8 and selects the
NetWare Frame type 9.
TCP/IP: Turns TCP/IP On/Off 0, DHCP On/Off! and
sets the IP address @, Subnet Mask # and
the Gateway address $.
Ether talk: Selects the Ether Talk setting %.
Option Status Page: Selects the setting for the Network Card Status
Page print out ^.
1
2
1
2