Kyocera 5035 All in One Printer User Manual


 
4-35
4. Selecting the Printer Settings
4-10 Memory card settings
Memory Card
This machine comes equipped with a slot for inserting a Memory Card.
Use a Memory Card that contains fonts in order to print with fonts other than those already installed in the machine, or use the card to save and
then read print data.
Inserting the Memory Card
Insert the Memory Card into the slot with the front of the card facing the rear of the machine.
IMPORTANT!
BE SURE to turn the main switch OFF BEFORE inserting or removing the Memory Card.
About the memory card settings
It is possible to perform memory card settings for the 11 items shown in the following chart.
For the most efficient use of the printer functions, select the various settings according to your printing needs.
Item
1 Writing data
If Write Data is selected here, the machine will enter a
waiting for data state until data is sent from the host
computer.
2 Partition List print out
3 Format memory card
If Ye s is selected here, the memory card will be
formatted.
4 Reading data
Reads the selected data from the memory card.
5 Reading font data
Reads all of the font data from the memory card.
Available settings
Write Data
List of Partitions
Format
Select from among the data
partition names that are
displayed.
Fonts
Remarks
Displayed only when the memory
card has been inserted.
Displayed only when the memory
card has been inserted.
Displayed only when the memory
card has been inserted. (ALWAYS
format the memory card using this
printer. If you attempt to format it with
another device, it may become
unusable.)
Displayed only when there is
appropriate data in the memory card.
Displayed only when there is
appropriate font data in the memory
card.