4-6
4. Selecting the Printer Settings
Use the numeric keys to input the first block of 3 digits of the
address then press the sharp (#) key in order to input the following
block of 3 digits.
• To change an entered address, press the sharp (#) key to select
the 3-digit block that you want to change and use the numeric keys
to enter the correct address.
Once the input of the IP address is completed, touch the “Close” key.
The display will return to the [TCP/IP] screen.
• To cancel the setting, touch the “Back” key.
$ Subnet Mask
Select “ON” under the “TCP/IP” setting.
Use the “▲” and “▼” cursor keys to select “Subnet Mask” and then
touch the “Change” key. The [Subnet Mask] screen will appear.
Enter the Subnet Mask address by following the same procedure as
for the IP Address.
% Gateway address
Select “On” under the “TCP/IP” setting.
Use the “▲” and “▼” cursor keys to select “Gateway” and then touch
the “Change” key. The [Gateway] screen will appear.
Enter the Gateway address by following the same procedure as for
the IP Address.
3
4
1
2
3
1
2
3