Filter
Top Products
4-22
4. Selecting the Printer Settings
4-7 Paper settings
About the paper settings
It is possible to perform paper settings for the 5 items shown in the following chart.
For the most efficient use of the printer functions, select the various settings according to your printing needs.
Item
1 Bypass mode
If “First” is selected here and there is paper set in the
bypass table, paper feed will be accomplished from the
bypass table.
2 Paper Feed Source
Selects the paper cassette that will be selected first.
3 Duplex mode
4 Stack select
Selects where the printing paper will be ejected.
5 Override A4/LT(8 1/2 x 11) On/Off
Allows both A4 and Letter (8 1/2 x 11) size paper to be
utilized as though they were the same size.
Available settings
Cassette, First
Bypass
Cassette1
Cassette2
Cassette3
Cassette4
None, Short edge bind, Long
edge bind
Face-down (Inner tray),
Face-Up (Side tray)
Main tray, (Face-Up, Face-down)
Sub tray, (Face-Up, Face-down)
Job separator, Mailbox (Face-Up),
Mailbox (Face-Down)
Off On
Remarks
Cassette 3 and Cassette 4 are
displayed only when the option
Cassette are installed.
“Cassette 1” Will not be displayed
only in Duplex Copiers.
Displayed only in Duplex Copiers.
“Main tray, (Face-Up, Face-down) and
Sub tray, (Face-Up, Face-down)” is
displayed only when the optional
Finisher is installed.
“Face-Up (Side tray)” Will not be
displayed if the optional Finisher is
installed.