Filter
Top Products
Indicators
3-5
3.3 Indicators
There are four indicators on the printer’s operator panel. These light, flash,
and turn off in combination to indicate the printer’s current status. This
section explains the indicators on the operator panel and the appropriate
corrective action to take in each case.
Indicator displays can be classified into three categories: maintenance,
errors, and normal. In the following table, indicators are shown to be lit,
flashing, or off. Further, flashing is divided into two speeds, fast and slow.
By using the KM-NET for Clients utility, you can monitor the printer’s
status from the computer. When a printer error occurs, the error message
is displayed on the computer’s screen. The display for the KM-NET for
Clients is described in the following tables.
Lit
Fast Flashing
Slow flashing
Off
Red/Green
Red/Green
Red/Green
Grey