Filter
Top Products
Indicators
3-9
(None) Fuser error (“6000” error)
Contact your Kyocera Mita dealer.
(None) The waste toner reservoir is full (“7980”
error)
Turn off the printer’s power and remove the process
unit from the printer. Gently shake the process unit
horizontally a few times, then reinstall it into the
printer. Turn on the printer’s power. If this error
message does not disappear, contact your Kyocera
Mita dealer (less than 100,000 pages printing).
(None) The waste toner reservoir is full (“7990”
error)
Same as above (100,000 pages printing or more).
(None) Controller check sum error (“F010” error)
Contact your Kyocera Mita dealer.
(None) Controller RAM read/write error (“F020”
error)
Contact your Kyocera Mita dealer.
(Continued on next page)
Indicator KM-NET for Clients display Corrective Action