Filter
Top Products
S When you make a copy on a non-standard size of paper, set the paper on
the manual feed table.
S Paper of about the thickness of 51 to 134 g/m
2
, 14 lb to 36 lb is suitable for
this copier.
✏ Do not use the following paper. Otherwise, a paper jam might occur.
• Bent, folded, or creased paper
• Torn paper
• Perforated paper
• Non-smooth paper
• Slippery paper
• Thin paper that has low stiffness
✏ Do not make a copy on paper with any kind of coating, such as thermosen-
sitive paper, art paper, aluminum foil, and carbon paper. Otherwise, a fault
might occur.
S If you make a copy on edged paper, the copy might be creased or a part of
the image might not be copied.
S If you make a copy on rough paper, the copy image might be blurred.
S When you make a copy on translucent paper, the copy might be waved.
S When you make copies on film, take out the copies delivered to the copy
guide one sheet at a time and place them on a flat surface.
BASIC
6 COPYING