Lanier LW 210 Copier User Manual


 
PAPER/TONER
Notes on Paper
S Do not set the following paper. Otherwise, a paper jam might occur.
Bent, folded, or creased paper Torn paper
Perforated paper Non-smooth paper
Slippery paper Thin paper that has low stiffness
S Do not make a copy on paper with any kind of coating, such as thermosen-
sitive paper, art paper, aluminum foil, and carbon paper. Otherwise, a fault
might occur.
S If you make a copy on edged paper, the copy might be creased or a part of
the image might not be copied.
S When you use roll paper, the roll must be black.
S When film is delivered from the copier, it is softened due to the fusing heat.
Place the film on a flat surface until the remaining heat is removed from the
film.
S If you make a copy on rough paper, the copy image might be blurred.
S Keep paper away from humidity. Once you unpack the container of paper,
store the paper in a polyvinyl bag in the following locations:
Location free from direct sunlight Location with the humidity of 70
% or less
Flat location
Toner
S Store toner cartridges levelly in the following locations:
Location free from direct sunlight Locations the toner could be
subjected to temperature of over
35 °C, 95 °F
R
WARNING:
Do not incinerate toner or toner containers. Toner dust
might ignite when exposed to open flames.
Dispose of the used toner container according to local
regulations.
Do not store toner where it will be exposed to heat.
Do not eat or swallow toner, and keep it out of reach of
children.
54 MAINTAINING YOUR COPIER