Lanier LW 210 Copier User Manual


 
WHEN C IS LIT
The roll feeder runs out of paper or the roll paper is not set properly.
Set paper in the roll feeder.
S Set roll paper for each roll.
S When you remove roll paper from a paper spool or set new paper on a spool,
place the spool horizontally on a flat surface.
S Even if the roll feeder runs out of paper during repeated copying, you can
make the rest of the copies after loading paper.
1 Pull out the roll feeder.
Pull out the feeder until it
stops.
2
Remove the roll paper.
3
If you replace the third roll, open
the third roll feeder cover and
remove the roll paper.
1st roll
2nd roll
38 WHAT TO DO IF SOMETHING GOES WRONG