Filter
Top Products
DO’S AND DON’TS
S Since some parts of the copier are supplied with high electrical voltage, touch
only the parts specified in this manual.
S While copying, do not turn off the main switch. When you turn off the copier,
confirm that all copy runs have finished.
S Do not step on or trip on the power cord.
S Do not unplug the power cord even after copying. This copier has the
anticondensation heaters to protect the internal parts from dew when the
ambient temperature changes. If you unplug the power cord, the anticon-
densation heaters do not work. However, disconnect the power cord for
safety when you will not use the copier for a long period.
S Do not open the original cover, original table, paper path section, and roll
feeder during copying. Otherwise, the copier stops a copy run causing a
paper jam.
S Do not move or slant the copier during copying.
S Do not remove or attach from and to the copier any screws or parts other
than those specified in this manual.
S Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.
S Do not spill water or other liquid on the copier.
S Do not lean on the rear cover.
S Do not obstruct the ventilation hole by placing or leaning an object in front
of the hole. The ventilation hole protects the temperature from rising inside
the copier. If the temperature rises excessively inside the machine, a fault
might occur.
MAINTAINING YOUR COPIER 51