Filter
Top Products
Frequently-used Commands
M - 10
DEFINE PORT nn DTRWAIT {EN|DIS}
When Enabled, the Server will not assert DTR on the port
when it is idle (no user logins or connections).
DEFINE PORT nn
FLOW option
CTS
Specifies CTS/RTS (hardware) flow control.
{EN|DIS}
Activates or deactivates the currently-configured flow-
control method.
NONE
Removes the current flow control settings.
XON
Specifies XON/XOFF (software) flow control.
DEFINE PORT nn NAME "newname"
Enter a name of up to 16 alphanumeric characters for the
specified port.
DEFINE PORT nn
PARITY option
parity
Enter even, odd, mark, or space. Specifying mark or
space will change the character size to 7 bits.
NONE
Specifies that no parity will be used (the default).
DEFINE PORT nn SPEED baudnum Sets the port’s baud rate. Acceptable baudnum values
range from 300 to 115200 baud (or 230000 baud for
1ooBASE-T Servers).
Table M-2: Port Commands, cont.
Command Option(s) Description