Lantronix EPS2-100 Network Card User Manual


 
NetWare Configuration
5 - 7
The print server has successfully
attached to the queue
Type NETSTAT at the Local> prompt. This will display
information about fileservers, printers, and queues that the
print server has found. If a queue is in JobPoll, the print server
has successfully attached to the queue.
The DSTree, DSContext, and
DSLicense
Type Show Protocol NetWare NDS. This command shows
the tree and the context that you have configured, a failure
code, and an NDS error code for each server.
DSTree is the directory service tree on which the print server is
located. DSContext is the context where the print server is
located; it must match the context on the file server (The
DSContext must be of the following form: ou=fruit.o=exotic).
DSLicensed should be yes.
Printer and queue changes have
propagated through the NDS tree
It may take a few minutes for the changes to propagate. If the
print server doesn’t attach, reboot the server.
Table 5-2: NetWare Host Troubleshooting (NDS), cont.
Area to Check Explanation