Lantronix EPS2-100 Network Card User Manual


 
NetWare Configuration
5 - 5
5.3 Creating NDS Print Queues Using PCONSOLE
1. Log in as Admin on the file server you will be changing.
2. Type PCONSOLE at the X: prompt to start the utility.
For example, if your file server is mapped to the F: drive, you would use the F: prompt.
3. From the main menu choose Quick Set-Up.
4. PCONSOLE will prompt you for information with which to configure the print queue.
The print server name is the name of your EPS (EPS_xxxxxx). The new printer name is the
service name (for example, EPS_xxxxxx_Text). The new print queue can be any name. The
print queue volume is the name of the file server from which the printer receives print
requests. The remaining fields can be left in their default settings.
NOTE: In the above text, xxxxxx represents the last 6 digits of your EPS’s
hardware address. The hardware address is printed on the unit’s
label.
5. Press the F10 key to save the print queue information.
6. Reboot the EPS.