Lantronix EPS2-100 Network Card User Manual


 
Troubleshooting
I - 4
I.4 DHCP Troubleshooting
Table I-4: DHCP Troubleshooting
Area to Check Explanation
DHCP is enabled on the Server. Use the Define Server DHCP Enabled command.
If you manually enter an IP address, DHCP is automatically
disabled.
Make sure the DHCP server is opera-
tional.
Check to see that the DHCP server is on and is functioning
correctly.
Did the Server get its IP address from the
DHCP server?
Refer to the DHCP Manager on your DHCP server for
information about addresses currently in use. If the DHCP
server does not list your Server’s IP address, there may be a
problem.