Filter
Top Products
Frequently-used Commands
M - 2
M.1 Server Commands
Table M-1: Frequently-used Server Commands
Command Option(s) Description
DEFINE SERVER BOOTP {EN|DIS}
Enables or disables querying for a BOOTP host at
system boot time.
DEFINE SERVER DHCP {EN|DIS}
Enables or disables querying for a DHCP host at sys-
tem boot time.
DEFINE SERVER GATEWAY ipaddress
Specifies the host to be used as a TCP/IP gateway to
forward packets between networks. Enter an IP
address.
DEFINE SERVER
INCOMING option
BOTH
Enables incoming LAT and Telnet connections.
LAT
Enables only incoming LAT connections.
NONE
Disables incoming connections.
TELNET
Enables only incoming Telnet connections.
PASSWORD
Causes the server to prompt for a password for all
incoming connections.
NOPASSWORD
Allows connections to be established without prompt-
ing for a password.