Lantronix EDS32PR Server User Manual


 
11: Service Settings
EDS User Guide 86
HTTP Configuration
On this page you may change HTTP configuration settings.
To configure HTTP:
1. Select HTTP on the menu bar and then Configuration at the top of the page. The HTTP
Configuration page opens.
Figure 11-11 HTTP Configuration
2. Enter or modify the following settings:
Table 11-12 HTTP Configuration
HTTP Configuration
Settings
Description
State Select Enabled to enable the HTTP server.
Port Enter the port for the HTTP server to use. The default is 80.
Secure Port Enter the port for the HTTPS server to use. The default is 443. The HTTP
server only listens on the HTTPS Port when an SSL certificate is
configured.