Filter
Top Products
Updating Firmware UDS10/UDS100 User Guide
42
2. Download the firmware to the unit using the DL command.
3. Select Send Text File and select the LTX*.HEX file for the UDS10 or DLX*.HEX
file for the UDS100 to be downloaded. The downloaded file must be the .HEX
(ASCII) version.
4. After receiving the final record, the unit checks the integrity of the firmware image
before programming the new firmware in the flash ROM. The following message
displays when the firmware upgrade is complete.
Figure 6-3. Firmware Upgrade Screen Display
*** NodeSet 2.0 ***
0>DL
02049 lines loaded.
Note: You can only update your unit's internal web interface using TFTP or
DeviceInstaller.