Filter
Top Products
UDS10/UDS100 User Guide Connectons and Pinouts
53
Null-Modem Cable
When attaching the DB9 of the UDS to the DB9 com port on a PC, use a null-modem
cable (Lantronix Part No. 500-163). The figure below shows the pinouts for a DB9 to
DB9 null-modem cable. To configure the UDS using the DB9 serial port, you only
need to pinout the TXD, RXD, and GND signals.
Figure 9-4. Null-Modem Cable (Lantronix Part No. 500-163)
Network Port
The unit's back panel contains a power plug and an RJ45 (10/100) Ethernet port.
Power input range on the power plug is 9-30 VDC or 9-24 VAC.
Figure 9-5. Network Interface