Filter
Top Products
Groups
Groups Overview
Groups consist of one or more users, and administrators can grant each group rights to Shares on the ix2
Network Storage. Users can belong to more than one group. The Groups page enables administrators to
create one or more groups, and grant each group rights to Shares on the ix2. Security must be enabled
before you can create groups.
Refer to the Security page to enable security permissions and create an administrator account, if
you have not done so already.
By default, there are no groups defined. Once an administrator defines one or more groups, the Groups
functionality is dynamically available when creating, modifying, and viewing users, Shares, and groups.
How Access Rights Are Granted Using Groups in Workgroup Mode
When groups are defined in Workgroup mode, a user's access rights are the most rights granted to the
user and all groups to which the user belongs. For example, assume 3 Shares exist (SF1, SF2, and SF3),
two users (UserA and UserB), and three groups (Group1, Group2, Group3). When created, UserA was not
granted access rights to any Share, and UserB was granted Read rights to SF3. Group1 has Read/Write
rights to SF1, Group2 has Read/Write rights to SF2, and Group3 has Read/Write rights to SF3. If UserA is
added to Group1, UserB is added to Group2, and Group1 is added to Group3, the table below shows the
resulting access rights for each user and group defined:
Name Member of Group Access Rights
UserA Group1, Group3 SF1 - Read/Write SF3 - Read/Write
UserB Group2 SF2 - Read/Write SF3 - Read
Group1 Group3 SF1 - Read/Write SF3 - Read/Write
Group2 none SF2 - Read/Write
Group3 none SF3 - Read/Write
Adding Groups
1. On the Groups page, click Add a group. The Information section opens.
2. From the Information section, give the new group a name.
3. To add users to the group, click Add users. Select a user or users to include in the group.
Select the checkbox in the title bar to add all listed users.
4. Click Apply to save your changes.
Managing Groups
The page describes how to:
● Remove a User from a Group
● Change Access Permissions
Securing Your ix2 Network Storage and Contents
61 Groups