Filter
Top Products
Item Description Default
Pip Size Press the cursor left/right button to
adjust the secondary image size.
Note: Pip Size is only available
when the projector is connected to
dual input sources.
Range: Off/Small/Medium/Large
Off
Pip Position Press the cursor left/right button to
adjust the secondary image location.
Note: Pip Position is only available
when the projector is connected to
dual input sources.
Range: Upper left to lower right
Upper Left
Pip Input Press the cursor left/right button to
adjust the secondary image source.
Note: Pip Input is only available
when the projector is connected to
dual input sources.
Range: Auto/Video/S-video
Auto
Cancel Resets Video Type, Video AGC, and
Projection to default values.
N/A
Information settings menu
To access the Information settings menu, follow the steps below:
1. Press the Menu button to open the main menu.
2. Press the cursor left/right button to move to the Information settings menu.
3. Press the cursor up/down button to move up and down in the Information
settings menu. The Information settings menu is shown below.
The following table shows the options that you will see in the Information Settings
menu.
Chapter 7.
1
On-Screen Display menu controls 7-7