Filter
Top Products
Item Description
Video Information Displays the resolution and refresh rate of
the connected video device.
Software Version Displays information about the firmware
version information.
Lamp Hours Displays lamp hours used information.
ID Displays ID information
Wireless Settings Displays Wireless Settings information. For
more information, go to ″Projector Wireless
Configuration.″
Lamp Mode Toggles between Normal and ECO lamp
modes. ECO mode uses less power but
decreases the lamp brightness.
Lamp Hour Reset Reset this item after replacing the lamp.
For more information, refer to “Replacing
the projector lamp” on page 5-1.
Cancel Resets Lamp Mode to the default setting.
Projector wireless configuration
You can configure a wireless projector with OSD menu. C400 wireless OSD menu
also includes some special items such as Showing Projector’s ID Number,
Connecting Reset, Wireless Repair, USB Image Display, Stop USB Image Display,
Enable WEP, Disable WEP, Refresh Session Key and Showing Session Key.
Item Description
Connection Reset Disconnects any existing current wireless
projecting session.
USB image display To allow the display of images from a USB
memory key.
Stop USB image display To stop USB image display.
7-8 C400 Wireless Projector: User’s Guide