Filter
Top Products
1 Operator information panel cable
2 Operator information panel connector
4. Install the cover (see “Removing and replacing the cover” on page 43).
5. Slide the server into the rack.
6. Reconnect the power cords and any cables that you removed.
7. Turn on the peripheral devices and the server.
Completing the installation
To complete the installation, complete the following steps:
1. If you removed any air baffles, reinstall them now (see “Removing and installing
the DIMM air baffle” on page 48).
2. If you removed the cover, replace it (see “Removing and replacing the cover” on
page 43).
3. Install the server in the rack cabinet (see the Rack Installation Instructions that
come with the server for instructions).
4. Reconnect the cables and power cords.
5. Update the server configuration (see “Updating the server configuration” on
page 113).
6. Slide the server back into the rack, if necessary.
Connecting the cables
The following illustration shows the locations of the input and output connectors on
the front of the server.
Chapter 5. Installing optional devices and replacing customer replaceable units 111