Lenovo S430 Laptop User Manual


 
System-unit serial number
System board serial number
Asset Tag
CPU Type
CPU Speed
Installed memory
UUID
MAC address (Internal LAN)
Cong menu
If you need to change the conguration of your computer, select Cong from the ThinkPad Setup menu.
Notes:
Default values are in boldface. The default settings are already optimized for you. If you consider
changing the computer conguration, proceed with extreme caution. Setting the conguration incorrectly
might cause unexpected results.
On each submenu, press Enter to show selectable options and select a desired option, or type desired
values from the keyboard directly.
Some items are displayed on the menu only if the computer supports the corresponding features.
The following table lists the Cong menu items.
Table 4. Cong menu items
Menu item
Submenu item Selection Comments
Wake On LAN
Disabled
AC Only
AC and Battery
Enable the system to Power on
when the Ethernet controller
receives a magic packet (a
special network message).
If you select AC Only, the Wake
on LAN function is enabled only
when the ac power adapter is
attached.
If you select AC and Battery,
the Wake on LAN function is
enabled with any power sources.
Note: AC power is required with
magic packet type Wake on
LAN.
Note: The Wake on LAN function
does not work when a hard disk
password is set.
Ethernet LAN Option ROM
Disabled
Enabled
Load the Ethernet LAN Option
ROM to enable startup from an
integrated network device.
Network
Wireless LAN Radio
On
Off
If you select On, the internal
wireless radio is turned on. If you
select Off, the internal wireless
radio is turned off.
Chapter 7. Advanced conguration 89