Filter
Top Products
Enable UPnP
Support
If enabled, the NAS will broadcast its availability. On systems
which support UPnP (e.g. Windows ME, XP), an icon for the
NAS will be automatically generated.
Port Number..
This port number is used for HTTP (Web Browser) connections
to this Server. The default is 80, as used by Web Servers. If this
is changed, you should use a number greater than 1024 (8080 is
often used). Also, if the port is not 80, you must specify the port
in your Web browser, in order to connect. To do this, add a ":"
and the port number after the address: e.g.
HTTP://192.168.0.100:8080
This example assumes the NAS IP Address is 192.168.0.100, and
the port number is 8080.
Restore Default
Config Button
Click this button to restore ALL settings to the factory defaults.
Data stored on the Server is not affected.
Page 27