Filter
Top Products
102
8.4.2 Wireless Setting (For WPS-9123 only)
If you want to use the printer server through wireless LAN, please
set up the printer server through Ethernet first and make sure your
wireless LAN setting is correct. After setting the wireless LAN, unplug
the Ethernet cable and restart the printer server, then you can start to
use the printer server through wireless LAN. If the wireless configuration
does not work, please plug the Ethernet cable again, restart the printer
server and configure the printer server through Ethernet until the
wireless LAN settings are correct.
You can enable/disable the wireless function and set parameters that
are used for the wireless stations to connect to this printer server from
here. The parameters include “Function”, “Mode”, “ESSID” and “Channel
Number”. You can manually set the parameters of wireless LAN in this
page or use the “Site Survey” function to automatically search for an
available access point and associate with it.
Function: You can select “Auto”, Enable” or “Disable” to manually
configure the wireless function.
y Auto – “Auto” is the default setting of the printer server. At this mode, the printer
server will automatically decide to enable or disable the wireless function. When
the printer server starts up, it will auto-detect if the LAN port is connected to an