Filter
Top Products
108
8.4.3 TCP/IP
You can configure the printer server to automatically get IP from
DHCP server or manually specify static IP. The printer server also has a
built-in DHCP server. You can enable this DHCP server and let it
manages IP for you.
If you need the printer server to automatically get an IP from DHCP
server, select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/
BOOTP)”. You also can select “Disable Use the following TCP/IP
Settings” to manually assign “IP Address”, “Subnet Mask” and “Gateway”
for the printer server.
You can enable/disable for the printer server’s DHCP server. The
DHCP server is disabled by default. If the DHCP Server is enabled, you
have to assign a range of IP addresses here. Fill in the “Start IP”,
“Range”, “Gateway”, “DNS”, and “Domain””, and the printer server will
assign a unique IP for each client.