Filter
Top Products
123
9.3 Get Setting Values – “get” Command
“get” command is used to get the setting values of this printer server.
The format of “get” command is as following:
get argument
Then the argument value will be displayed after the command. For
example, if I want to get IP address of the printer server, I type “get ip”
command and the IP value “IP_ADDR=’192.168.2.2’” is displayed:
admin# get ip
IP_ADDR=192.168.2.2
If you enter “get” only, the system will list all available arguments of
“get” command.
The following table lists all the arguments whose value can be got by
“get” command:
Argument Description Example
psname Printer server name admin# get psname
PORT1_PS=’PS254896’
password Login password admin# get password
USER_PASSWORD=’1234’
username Login username admin# get username
USER_NAME=’admin’
wlfunc Wireless LAN function is enabled
or disabled
0: disabled
1: enabled
2: auto
admin# get wlfunc
WIRELESS_FUNCTION=2
wlmode Wireless LAN mode is
Infrastructure or Ad Hoc
0: Infrastructure
1: Ad Hoc
admin# get wlmode
AP_MODE=1
ESSID ESSID of the wireless LAN admin# get ESSID
SSID=’default’
Argument Description Example
channel Channel number used by wireless
LAN
admin# get channel
CHANNEL=11
wep The mode of WEP
0: disable
1: 64 bit WEP enabled
2: 128 bit WEP enabled
admin# get wep
WEP=0
defkey Default WEP key number admin# get defkey