Filter
Top Products
76
7.13 Wireless Configuration (For WPS-9123 only)
If you want to use the printer server through wireless LAN,
please set up the printer server through Ethernet first and make sure
your wireless LAN setting is correct. After setting the wireless LAN,
unplug the Ethernet cable and restart the printer server, then you can
start to use the printer server through wireless LAN. If the wireless
configuration does not work, please plug the Ethernet cable again,
restart the printer server and configure the printer server through
Ethernet until the wireless LAN settings are correct.
The default settings of the printer server wireless function are as
follows.
y Mode: Ad-Hoc
y SSID: Default
y Channel: 11
Double Click “Wireless” icon and the wireless configuration window
will pop-up.
If you use access point to build up wireless network, you have to
select “Infrastructure Mode”. If you do not have any access point and
want to use peer-to-peer connection to build up wireless network, you
have to select “Ad-Hoc Mode”.
After selecting the operation modes of the wireless function, click
“Next” to go to further detailed configuration.