Filter
Top Products
58
printer-name:\
:lp=:\
:rm=203.66.191.186:\
:rp=lpt1:\
:lf=/var/spool/lpd/pserverd.log:\
:sd=/var/spool/lpd/pserverd:\
:mx#0:
Lines should be indented with tabs. More than one printer name can
be used, with variants separated by vertical bars (name1|name2).
The rm= entry should correspond to the IP address you have
assigned to the printer server. You can also use a host name if you have
assigned one in the /etc/hosts file.
The sd= entry should correspond to the spool directory you created
in the previous step.
The rp= entry should correspond to the port name of the remote
printer. The values should be one of lpt1, lpt2 or lpt3 depends on the
printer port.
The printer server should now be available for printing from your
Unix host.