Filter
Top Products
PC Configuration
Macintosh Clients
From your Macintosh, you can access the Internet via the LevelOne Wireless Broadband
Router. The procedure is as follows.
1. Open the TCP/IP Control Panel.
2. Select Ethernet from the Connect via pop-up menu.
3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field
can be left blank.
4. Close the TCP/IP panel, saving your settings.
Note:
If using manually assigned IP addresses instead of DHCP, the required changes are:
• Set the Router Address field to the LevelOne Wireless Broadband Router 's IP Address.
• Ensure your DNS settings are correct.
Printing
If you wish to share the printer connected to the LevelOne Wireless Broadband Router, using a
LaserWriter or compatible is required.
Installing the Printer
To gain access to the printer connected to the LevelOne Wireless Broadband Router, follow
this procedure:
1. Select Control Panel - Network.
2. Ensure that EtherTalk is selected under AppleTalk Connection.
3. Open Chooser, and select the correct printer type (e.g. LaserWriter).
4. From the list of available printers on the right, select the LevelOne Wireless Broadband
Router, then click Create.
5. The new printer will be created, and can be used like any other printer.
43