Filter
Top Products
LevelOne Wireless Broadband Router User Guide
Modem Properties Screen
This screen is reached via the Modem Properties button on the Dial-in screen.
• Normally, it is not necessary to change these settings.
• Refer to your Modem's user manual to determine the "AT" commands it supports.
Figure 42: Modem Properties Screen
Data - Modem Properties Screen
Initial String
This is a series of AT commands used to correctly configure your
modem or ISDN TA.
See Appendix C - AT Commands for further details about the
required Initial String settings and standard AT commands.
Dial Type
• Select Tone, Pulse or Other to match your system.
• For Other, you must provide the Dial String.
Dial String
• This is the "AT" command sent to your modem before
dialing. For example, "ATDT" tells your modem to use Tone
Dialing.
• Check your modem's documentation to find the correct AT
commands.
Auto Answer Com-
mands
• Enter the command strings which turn the "auto-answer"
function in your modem (or ISDN TA) ON and OFF.
• Check your modem's documentation to find these commands.
76