Filter
Top Products
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
Stack the pages of a print job in sequence when printing multiple copies.
Note: “(1,2,3) (1,2,3)” is the factory default setting.
Sides (Duplex)
1 sided
2 sided
Specify whether prints are on one side or on both sides of the page.
Note: 1 sided is the factory default setting.
Staple
Off
On
Specify whether prints are stapled.
Notes:
• Off is the factory default setting.
• This menu item appears only when a staple finisher is installed.
Hole Punch
Off
On
Specify whether prints have punched holes.
Notes:
• Off is the factory default setting.
• This menu item appears only when a supported staple, hole punch finisher is installed.
Hole Punch Mode
2 holes
3 holes
4 holes
Specify the number of holes to be made on the prints.
Notes:
• “3 holes” is the U.S. factory default setting. “4 holes” is the international factory default
setting.
• This menu item appears only when a supported staple, hole punch finisher is installed.
Duplex Binding
Long Edge
Short Edge
Define binding for duplexed pages in relation to the page orientation of the printed document.
Notes:
• Long Edge assumes binding along the long edge of the page (left edge for portrait and top
edge for landscape).
• Short Edge assumes binding along the short edge of the page (top edge for portrait and
left edge for landscape).
Paper Saver Orientation
Auto
Landscape
Portrait
Specify the orientation of a multiple‑page document.
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Specify that multiple‑page images be printed on one side of a paper.
Notes:
• Off is the factory default setting.
• The number selected is the number of page images that will print per side.
Paper Saver Border
None
Solid
Print a border on each page image.
Note: None is the factory default setting.
Understanding the printer menus 227