Filter
Top Products
Incompatible tray [x] [59]
Try one or more of the following:
• Remove the indicated tray.
• From the printer control panel, touch Continue to clear the message and continue printing without using the
indicated tray.
Incorrect paper size, open [paper source] [34]
Try one or more of the following:
• Load the correct size and type of paper in the tray, and then specify the paper size and type in the Paper menu on
the printer control panel.
• Make sure the correct paper size and type are specified in Print Properties or the Print dialog settings.
• Check if the paper size is correctly set. For example, if MP Feeder Size is set to Universal, then make sure the paper
is large enough for the data being printed.
• Check the length and width guides and make sure the paper is loaded properly in the tray.
• From the printer control panel, touch Continue to clear the message and print using a different tray.
• Cancel the print job.
Insert hole punch box
Insert the hole punch box into the finisher, and then touch Continue to clear the message.
Insert staple cartridge
Try one or more of the following:
• Insert a staple cartridge.
• Touch Continue to clear the message and print without using the staple finisher.
Insert Tray [x]
Try one or more of the following:
• Insert the specified tray into the printer.
• Cancel the print job.
• Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel.
Install bin [x]
Try one or more of the following:
• Install the specified bin:
1 Turn off the printer.
2 Unplug the power cord from the electrical outlet.
3 Install the specified bin.
Troubleshooting 307