Filter
Top Products
Use To
Print Area
Normal
Fit to Page
Whole Page
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
• Whole Page allows the image to be moved into the
non‑printable area defined by the Normal setting. Whole
Page only affects pages printed using a PCL 5e interpreter.
This has no effect on pages printed using the PCL XL or
PostScript interpreter.
Download Target
RAM
Flash
Disk
Set the storage location for downloads.
Notes:
• RAM is the factory default setting. Storing downloads in the
RAM is temporary.
• Storing downloads in the flash memory or in a printer hard
disk places them in permanent storage. Downloads remain in
the flash memory or in the printer hard disk even when the
printer is turned off.
• This menu appears only when a formatted, working flash
drive or printer hard disk is installed.
Resource Save
On
Off
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives a
job that requires more memory than is available.
Notes:
• Off is the factory default setting. This sets the printer to
retain the downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
• On retains the downloads during language changes and
printer resets. If the printer runs out of memory, then
Memory Full [38] appears, and downloads are not
deleted.
Print All Order
Alphabetical
Oldest First
Newest First
Specify the order in which held and confidential jobs are printed
when Print All is selected.
Note: Alphabetical is the factory default setting. Print jobs always
appear in alphabetical order on the printer control panel.
Understanding the printer menus 229