Filter
Top Products
33
Understanding the control panel lights
Memory full
Short paper
Light sequence:
• Continue—On
• Ready—On
• Toner Low/Replace PC Kit—On
• Error—On
What this light sequence means:
The printer is processing data, but the memory used to store
pages is full.
What you can do:
• Press Continue to clear the message and continue
printing the job (the job may not print correctly).
• Press and release Cancel to cancel the print job.
• Press and hold Cancel to reset the printer.
• To avoid this error in the future:
– Simplify the print job. Reduce the complexity of the
page by reducing the amount of text or graphics on
the page and deleting unnecessary downloaded
fonts or macros.
– Install additional printer memory (see Adding a
memory card on page 72).
Light sequence:
• Continue—On
• Ready—On
• Load Paper—On
• Error—On
What this light sequence means:
The paper length is too short to print the formatted data. This
occurs when the printer does not know the print media size loaded
in the tray, or there is a problem feeding the print media.
What you can do:
• Make sure the print media you loaded is large enough.
• Open the front door, clear the paper path, and close the
door to resume printing (see Clearing jams on
page 56).
• Press Continue to clear the code and continue
printing the job.
• Press Cancel to cancel the print job.