Filter
Top Products
Cannot print from PictBridge-enabled devices
Enable PictBridge printing on the device by selecting the correct USB mode. For
more information, see the documentation that came with the device.
1 Disconnect the device.
2 Connect a PictBridge-enabled device to the PictBridge port. See the
documentation that came with your device to determine whether it is PictBridge-
enabled.
Use only the USB cable that came with the camera.
Remove the memory card from the printer.
Error messages
• “Start errors” on page 48
• “Run errors” on page 48
Start errors
The printer was unable to start.
This includes the following errors:
• 0000
• 0001
• 0002
• 0003
• 1102
1 Press to turn the printer off.
2 Press to turn the printer on.
Run errors
This includes the following errors:
• 1003
• 0200
• 1201
• 1202
48