Filter
Top Products
26
Removing and reinstalling the software
If the All-In-One software is not functioning properly or a communications
error message displays when you try to use the All-In-One, you may need
to remove and then reinstall the printer software.
1 From the desktop, click Start Programs
Lexmark X1100 Series Uninstall Lexmark X1100 Series.
Note: If Uninstall is not an option on the menu, see “All-In-One
is not communicating with the computer” on page 21.
2 Follow the instructions on the computer screen to remove the
All-In-One software.
3 Restart the computer before reinstalling the software.
4 Insert the CD and follow the instructions on the computer screen to
install the software. For help, refer to the setup documentation.
Other help sources
If the preceding solutions do not solve the problem with your All-In-One:
• Refer to the Lexmark Solution Center software for more
troubleshooting information:
1 Click Start Programs Lexmark X1100 Series
Lexmark X1100 Series Solution Center.
2 Click the Troubleshooting tab on the left side of the screen.
• Visit our Web site at http://support.lexmark.com/ for help.