Lexmark MS510DN Printer User Manual


 
Use To
Timeouts
Hibernate Timeout
Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Set the amount of time the printer waits before it enters Hibernate
mode.
Notes:
“Disabled” is the factory default setting in all countries
except European Union countries and Switzerland.
“3 days” is the factory default setting for all European Union
countries and Switzerland.
Timeouts
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Set the printer to Hibernate mode even if there is an active Ethernet
connection.
Note: “Do Not Hibernate” is the factory default setting.
Timeouts
Screen Timeout
15–300 sec
Set the amount of time in seconds the printer waits before
returning the display to the ready state.
Note: “30 sec” is the factory default setting.
Timeouts
Prolong Screen Timeout
On
Off
Display a message that lets you reset the screen timeout timer
instead of returning to the home screen.
Note: Off is the factory default setting.
Timeouts
Print Timeout
Disabled
1–255 sec
Set the amount of time in seconds the printer waits to receive an
endofjob message before canceling the remainder of the print
job.
Notes:
“90 sec” is the factory default setting.
When the timer expires, any partially printed page still in the
printer is printed.
Print Timeout is available only when using PCL emulation.
This setting has no effect on PostScript emulation print jobs.
Timeouts
Wait Timeout
Disabled
15–65535 sec
Set the amount of time in seconds the printer waits for additional
data before canceling a print job.
Notes:
“40 sec” is the factory default setting.
This setting has no effect on PCL emulation print jobs.
1
This menu item appears only in touchscreen printer models.
2
This menu item appears only in nontouchscreen printer models.
Understanding the printer menus 153