![](http://pdfasset.owneriq.net/4/01/4012649e-394f-472e-9ea6-055162a7acc9/4012649e-394f-472e-9ea6-055162a7acc9-bg19.png)
4 Close the controller board shield, and then close the access door.
Note: When the printer software and any hardware options are installed, you may need to manually add the options
in the printer driver to make them available for print jobs. For more information, see “Updating available options in
the printer driver” on page 29.
Removing a printer hard disk
Note: This option is supported only in MS610de printer model.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any controller board electronic components or connectors.
1 Access the controller board.
For MS610de printer model, see “Accessing the controller board” on page 74.
Note: This task requires a flathead screwdriver.
2 Loosen the screws that connect the printer hard disk to the controller board bracket.
Additional printer setup 25