Filter
Top Products
Installing a printer hard disk
Note: This option is available only in MS610de printer model.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any controller board electronic components or connectors.
1 Access the controller board.
For more information, see “Accessing the controller board” on page 74
Note: This task requires a flathead screwdriver.
2 Unpack the printer hard disk.
3 Install the printer hard disk on the controller board:
Warning—Potential Damage: Hold only the edges of the printed circuit board assembly. Do not touch or press
on the center of the printer hard disk. Doing so may cause damage.
a Using a flathead screwdriver, loosen the screws.
Additional printer setup 23