Filter
Top Products
Note: When the printer software and any hardware options are installed, you may need to manually add the options
in the printer driver to make them available for print jobs. For more information, see “Updating available options in
the printer driver” on page 29.
Installing an Internal Solutions Port
The controller board supports one optional Lexmark
TM
Internal Solutions Port (ISP). This option is supported only in
MS610de printer model.
Note: This task requires a flat‑head screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity.
Touch a metal surface on the printer before touching any controller board electronic components or connectors.
1 Open the controller board access door.
Additional printer setup 16