Filter
Top Products
print is too light 316
printer is printing solid black
pages 312
repeating defects appear on
prints 317
shadow images appear on
prints 318
skewed print 318
streaked horizontal lines appear
on prints 319
streaked vertical lines 320
toner fog or background
shading 321
toner rubs off 322
toner specks appear on prints 322
transparency print quality is
poor 322
uneven print density 323
white streaks 323
print troubleshooting
envelope seals when printing 299
error reading flash drive 299
held jobs do not print 298
incorrect characters print 300
incorrect margins on prints 310
jammed pages are not
reprinted 297
job prints from wrong tray 300
job prints on wrong paper 300
jobs do not print 302
Large jobs do not collate 301
multiple‑language PDF files do not
print 301
paper curl 311
paper frequently jams 297
print job takes longer than
expected 303
tray linking does not work 304
unexpected page breaks
occur 305
printer
basic model 11
fully configured 11
minimum clearances 10
moving 10, 253, 254
selecting a location 10
shipping 254
printer configurations 11
printer control panel 15
factory defaults, restoring 257
indicator light 15
Sleep button light 15
Printer had to restart. Last job may
be incomplete. 284
printer hard disk
disposing of 236
encrypting 238
installing 40
removing 45
wiping 237
printer hard disk encryption 238
printer hard disk memory
erasing 237
printer information
where to find 9
printer IP address
finding 20
printer is printing blank pages 311
printer messages
[x]‑ page jam, open upper rear
door. [202] 264
[x]‑page jam, clear manual feeder.
[250] 270
[x]‑page jam, lift front cover to
remove cartridge. [200–
201] 261
[x]‑page jam, open automatic
feeder top cover. [28y.xx] 272
[x]‑page jam, open tray [x].
[24x] 269
[x]‑page jam, open upper and
lower rear door. [231–234] 265
[x]‑page jam, remove standard bin
jam. [203] 267
[x]‑page jam, remove tray 1 to
clear duplex. [235–239] 268
Cartridge low [88.xy] 274
Cartridge nearly low [88.xy] 274
Cartridge very low, [x] estimated
pages remain [88.xy] 274
Change [paper source] to [custom
string] load [orientation] 274
Change [paper source] to [custom
type name] load
[orientation] 274
Change [paper source] to [paper
size] load [orientation] 274
Change [paper source] to [paper
type] [paper size] load
[orientation] 275
Check tray [x] connection 275
Close door or insert cartridge 275
Close flatbed cover and load
originals if restarting job
[2yy.xx] 275
Close front door 276
Close top access cover 276
Complex page, some data may not
have printed [39] 276
Configuration change, some held
jobs were not restored [57] 276
Defective flash detected [51] 276
Disk full 62 276
Disk full, scan job canceled 276
Disk must be formatted for use in
this device 277
Disk near full. Securely clearing
disk space. 277
Error reading USB drive. Remove
USB. 277
Error reading USB hub. Remove
hub. 277
Fax memory full 277
Fax partition inoperative. Contact
system administrator. 277
Fax server 'To Format' not set up.
Contact system
administrator. 277
Fax Station Name not set up.
Contact system
administrator. 278
Fax Station Number not set up.
Contact system
administrator. 278
Imaging unit low [84.xy] 278
Imaging unit nearly low
[84.xy] 278
Imaging unit very low, [x]
estimated pages remain
[84.xy] 278
Incompatible tray [x] [59] 278
Incorrect paper size, open [paper
source] [34] 278
Insert Tray [x] 279
Install duplex 279
Install Tray [x] 279
Insufficient memory for Flash
Memory Defragment operation
[37] 279
Insufficient memory to collate job
[37] 280
Insufficient memory to support
Resource Save feature [35] 280
Index 363