Filter
Top Products
Customizing your MFP option
10
Getting started
Customizing your MFP option
You can customize your MFP with various input, output, and memory options.
Note: Leave all components and hardware in the boxes until you are ready to install them.
Check the boxes you received to make sure you have all the necessary components for the configuration you ordered.
Install the printer and any options you have purchased in the following order:
CAUTION: If you are installing options after setting up the printer, turn the printer off, and unplug the power cord from
the wall outlet before continuing.
1 Scanner stand, furniture stand, or caster base
2 2000-sheet drawer
3 250-sheet or 500-sheet drawer
4 Duplex unit
5 Printer
6 Scanner shelf or output options
7 MFP option (scanner)
The following options are available for your MFP.
Note: Additional options may be available for your MFP.
CAUTION: Floor-mounted configurations require additional furniture for stability. You must use
either a printer stand or caster base if you are using a 2000-sheet drawer. Certain other configurations
also must have a printer stand or caster base. More information is available on our Lexmark Web site
at www.lexmark.com/multifunctionprinters.
Input options Output options Other options
250-sheet drawer Output expander Duplex unit
500-sheet drawer 5-bin mailbox Spacer
2000-sheet drawer (letter/A4) High capacity output stacker Scanner shelf
250-Sheet Universally Attached Tray with Drawer StapleSmart™ finisher Caster base
400-Sheet Universally Attached Tray with Drawer Scanner stand
Envelope feeder Furniture stand