Filter
Top Products
Installing the caster base
25
Caster base setup
Installing the caster base
The caster base is used when placing your MFP on the scanner stand and the printer on the floor. It provides mobility and
a stable platform for your printer. There are different assembly instructions for use with a 2000-sheet drawer, 500-sheet
drawer, or a 250-sheet drawer.
1 Follow the assembly instructions provided with the caster base.
2 Go to Installing the scanner shelf on page 25.
Installing the scanner shelf
Note: If you do not have a scanner shelf but have a scanner stand, go to Scanner stand setup on page 28.
Otherwise, go to Scanner option setup on page 30.
1 Remove the top cover from the printer.
Note: A scanner shelf is not available for the T640 printer.
You will not need the cover when the scanner shelf is attached. Store the cover; it will be needed if you remove the
scanner shelf.
2 Remove the backing from the tape on the shelf bottom.