Filter
Top Products
31
10
Write a note to accompany the attached photograph.
11 Click Send.
Enlarge or reduce needlepoint or woodworking patterns
You can enlarge or reduce patterns or photos using the operator panel or
the All-In-One Center on your computer.
Using the operator panel
1 Open the top cover.
2 Place the pattern or photo you want to enlarge or reduce face down
on the scanner glass. Make sure the upper left corner of the front of
the item aligns with the arrow at the bottom right of the scanner.
3 Close the top cover.
4 On the operator panel, press Reduce/Enlarge.
5 Press the right arrow button until you see the option you want to
select (50% (Half), 100% (Same), 200% (Double), Custom %, Fit to
Page, 2x2 Poster, 3x3 Poster, or 4x4 Poster).
6 Press Select.
7 To begin copying, press Color Copy or Black Copy.
8 After your image prints, press Stop/Clear to return to Normal
Quality.
Using the All-In-One software
1 Open the top cover.
2 Place the pattern or photo you want to enlarge or reduce face down
on the scanner glass. Make sure the upper left corner of the front of
the item aligns with the arrow at the bottom right of the scanner.
3 Close the top cover.