Liebert GXT2-6000RTL630 Power Supply User Manual


 
Major Components
9
Figure 3 Internal battery pack with connector
3.3 Removable Power Distribution Box
The UPS incorporates a power distribution box that must be installed before the unit is placed into
service. The power distribution box provides the benefits of plug and receptacle convenience with a
manual bypass switch. For installation instructions, see 5.4 - Connect Input/Output Power.
Optional versions may be available to replace the standard box for custom installations.
Figure 4 Optional power distribution—PD-L630
OUTPUT
BREAKER
20A 240V
~/T
OUTPUT
BREA
KER
20A 240V~/T
ON
ON
INPPUT
OUTPUT ONLY CB DOES
NOT
CONNECT BYPASS POWER TO
MANUAL B
YPASS SWITC
H.
BREAKER
30A
ON
OFF
OFF
OFF
UPS
UTILITY
MAITANENCE BYPASS
AVAI LA BL E
UPS
AVAI LA BL E
CONNECTOR PROTECTIVE COVER DO NOT REMOVE SCREWS
PRIOR TO INSTALLATION OF BOX ON UPS
-LOOSEN THREE SCREWS 1 TURN
- SLIDE COVER TO EXPOSE CONNECTOR
-TIGHTEN SCREWS GENTLY
UPON REMOVAL OF BOX FROM UPS
-LOOSEN THREE SCREWS 1 TURN
-SLIDE COVER TO REACH END SCREW AND COVER COMMUNICATION
-TIGHTEN SCREWS GENTLY
Manual
Bypass
Switch
Wired
connections
to UPS