Filter
Top Products
Section 3: Operation
Status Sub-menu (cont’d)
The Alarm Delays screen indicates the time in seconds of an active
delay on each unit. Active alarm delays count up while the condition is
present and count down if the condition is cleared before the Alarm
Delay time elapses.
4. R-DELAY
From the Status Sub-menu, press 4. R-DELAY to display the Restart
Delays screen:
RESTART DELAYS
0000 0000 0000 0000
0000 0000 0000 0000
PUSH CLEAR TO RETURN
The Restart Delays screen indicates the time in seconds of an active
restart delay on each unit.
5. H-DELAY
From the Status Sub-menu, press 5. H-DELAY to display the Hold
Delay screen:
HOLD DELAY = 0000
PUSH CLEAR TO RETURN
Hold Delay applies to the system rather than to each unit. Therefore,
only one number is displayed. This display indicates the time in seconds
of an active Hold Delay.
Set Options Sub-menu
From the Main Menu, press 2. SETUP to display the Set Options
Menu:
SET OPTIONS MENU
1. UNITS 2. DELAYS
3. TEMP/HUM 4. STANDBY
5. PASSWORD 6. RETURN
1. UNITS
From the Set Options Sub-menu, press 1. UNITS to display the Set
Units menu:
Set Options Sub-menu (cont’d)
SET UNITS MENU
1. ZONES/UNITS
2. EMER.OP 3. LABELS
4. SHUTDOWN 5. RETURN
8 • User Manual (9/97)